Ninja Coffee Maker How to Turn off Clean Light

Turning Off the Clean Light on Your Ninja Coffee Maker: A Simple Guide. Find out the necessary steps to switch off that light by checking out the article.

Ninja Coffee makers are very well-known for their quality performance and wonderful design. These Coffee makers are used all around the globe in homes, offices, and cafes. Because they are able to quickly and easily produce a delicious cup of coffee. But, like any other coffee maker, Ninja Coffee maker also gives you good results if the machine is kept clean.

You need to have a good cup of coffee in the morning to start the day. That’s why your coffee machine needs to be cleaned regularly but many people neglect it. For this reason, they can’t get the delicious taste and flavor of the coffee.

If you have a ninja coffee maker in your home and you want to know how to turn off clean lights, keep reading the article. In this article, we will mention the full procedure of how to turn off clean lights in the Ninja coffee maker.

Ninja Coffee Maker: How to Turn off Clean Light

Cleaning Coffee maker is important. Without cleaning a coffee maker, the flavor and taste can be affected. The coffee maker will indicate the cleaning time with the light. When the calcification is interfering with the flavorful taste of your coffee, then the clean indicator will start flashing. This clean light notifies you that the Ninja coffee maker needs a deep cleaning. Below, we will discuss how to turn off clean lights with a long clean process to following steps.

Step 1

At first, you need to make sure that your water reservoir is cleaned and if there is some water in the reservoir then dispose of it. Also, make sure, your mesh basket is clean. Then, you need to discard the water reservoir from the Ninja Coffee machine.

Step 2

Now you need to fill the water reservoir with two-part of filtered water. Then, add one part of vinegar to the reservoir. This should fill the water reservoir. If you have used it a while ago or your machine is hot let the machine cool down before you start the process.

Step 3

After your machine cools down, put the water reservoir on the machine filled with the solution. Then, press the ‘’CLEAN’’ button. The clean light will flash and a cleaning cycle will start. If you want to pause the machine, you can press the ‘’CLEAN’’ button again.

Step 4

Make sure your machine sits properly. Because, if machine started cleaning cycle it takes a long time 30 minutes to 1 hour which is longer than brewing coffee. So, be patient when the Ninja coffee maker machine is self-cleaning.

Step 5

When the cycling is done, press the clean ‘’CLEAN’’ button again. And, unplug the machine, also let the machine cool down before starting the next process.

Step 6

After the cleaning process is complete, all the water and vinegar mixture should be accumulated in the carafe. Discard the solution. If you have a scrub brush, clean the carafe, mesh basket, and water reservoir lightly. Otherwise, you can simply rinse these on water.

Step 7

After cleaning these, set up the machine properly again. And fill the water reservoir with clean water only. Then, press the ‘’CLEAN’’ button again and let the machine run for 5 minutes to 8 minutes without stopping it.

Step 8

When the second cleaning cycling is done, discard water from the carafe and clean the carafe properly. You may run the cycle of clean water several times to eradicate the vinegar flavor and smell from the machine.

Step 9 (Optional)

At the end of the process, you can wipe the “hot plate” on the bottom of the carafe. Your cleaning process is done. Now, when everything is dried properly you can reassemble all of the items and enjoy your clean and fresh cup of coffee.

When you plugged in the machine, the ‘’CLEAN’’ light should stay off at this point, until the machine is required to clean again.

What to Do If Ninja Coffee Maker Lights Stays On?

Here is what you need to do if the Ninja Coffee Maker light is not going away even after cleaning:

Make Sure You Have Cleaned It Properly

If you clean light still stays on, it may be an indication there is still buildup of minerals inside the machine. That means you will require running another cleaning cycle following the same method. Note that the issue can also occur if you do the cleaning in the wrong way. Make sure you are following the steps correctly.

Once you complete the cleaning properly, the clean light should go away. If the light is still on, you should try the other methods we will discuss below.

Unplug and Reset the Coffee Maker

If you have already cleaned your machine properly but the clean light still lights up, try to reset it. Sometimes glitch in the circuit can keep the light turn on. Here is how to do the reset – turn off the machine and remove the plug. Then, wait at least 5 minutes before you plug in the machine again. The cleaning indicator should be off at this time. You need to program the machine again, since unplugging it resets the brew timers.

Call the Experts

If all else fails, still your clean light stays on, you should call the Ninja customer service. Before calling you should check your important documents, such as the Ninja coffee maker model, receipt, and warranty card that come with your Coffee maker. Also, check the warranty card date it’s still cover the machine.

If you haven’t your warranty card, register your coffee maker through their website to claim a hassle-free warranty.

Conclusion

Like any other machine, the ninja coffee maker needs maintenance to run well for a long time. Keeping the machine clean should always be a priority. Ninja Coffee maker is an outstanding coffee machine. If you used it wisely and cleaned it properly when needed, it can give you longevity and good service. So, if you want to enjoy the delicious taste and flavor of the coffee, then you need to clean up your Ninja coffee maker regularly.