Table of Contents
Starting the day off right requires drinking a good cup of coffee in the morning. It is necessary to clean your coffee machine regularly, but many people neglect it. You use that object every day, often multiple times every day. To keep your coffeemaker in working order, it’s essential to give it a complete cleaning about once every six months.
You are likely wondering how to use the Self-clean function on Cuisinart coffee makers. Don’t worry, and we’re here to help.
The Self-Clean Process For Cuisinart Coffee Maker
It would help if you cleaned out mineral buildup on the coffee machine whenever the Self-Clean indicator starts flashing. This interferes with the machine’s operation and causes your coffee to taste bad. You can obliterate mineral buildup from your coffee maker by following these steps:
Step 1: Empty The Machine
Whenever you are ready to clean that incredible machine, pull out the pot and the filter basket.
Step 2: Make a mixture of Vinegar and Water
Pour ⅓ white vinegar and ⅔ fresh water into the water reservoir to clean it. Use 8 cups of water and 4 cups of vinegar to fill a 12-cup reservoir.
Step 3: Run the Coffee Maker
Push the Self-Clean button. You can press the Brew button if there is no Self-Clean button. Upon seeing the Self-Clean light, turn the coffeemaker on by pushing the ON button.
You will see the self-cleaning light. The coffeemaker has been set to clean itself automatically. The coffeemaker will shut off once the five beeps are heard at the end of the cycle.
Turn ON the coffeemaker and check to see whether the Self-Clean light is still showing. If so, turn it OFF and then use a vinegar and water solution to clean it again.
Step 4: Use Fresh Water for a Rinse Cycle
Turn off the coffeemaker and then run the machine with fresh water for one cycle before brewing coffee again if the Self-Clean light is not flashing.
Pour water into the reservoir and brew. Repetition is necessary at least once more to remove all vinegar solutions. It should take one cycle for the coffeemaker to be thoroughly cleaned.
You can achieve a deeper clean by turning off the machine for about one hour and then allowing the cycle to finish.
Step 5: Let the Machine Cool Down
Unplug the machine to allow it to cool down for about 30 minutes after cleaning the inside of it.
Step 6: Clean Filter, Carafe, and Base
Step 7: Dry the Pieces Completely
It will help if you air dry your pieces on the counter or in a dish drainer before reassembling them.
Step 8: Place Everything Back Together
Reassemble all of the items when everything is dehydrated and enjoy your clean, fresh cup of coffee.
Important Notes about the Self Clean Function
1) Pressing the Self Clean button will cancel all other settings. You could press it again if it were pressed accidentally to restore the machine’s previous settings.
2) Pressing ON/OFF also shuts the coffeemaker off as well as exiting Self Clean Mode.
3) Although you followed all the steps, the Self-Clean light still came on, asking you to repeat it. Your coffee maker probably has quite a bit of calcium built up and needs to run the cleaning cycle several times.
How Often to Clean a Cuisinart Coffee Maker
It depends on how much coffee you make. Ideally, it would help if you cleaned every six months. Making multiple pots of coffee a day may require frequent cleaning.
After Cleaning the Coffee maker, Does It Taste Weird?
You may have to run the vinegar solution a couple of times, depending on how much buildup you have inside your machine. The next time that you run the cycle let the machine cool fully between each new cycle.
What’s the Purpose Of Vinegar?
The coffee maker builds up hard water and minerals over time. Vinegar is an excellent option for decalcifying reservoirs. Due to its acidity, vinegar is excellent for removing minerals from surfaces.
Vinegar is also readily available and very cheap. It’s advantageous, since your machine may require many cycles to remove all of the calcium and other minerals that build up.
The next time you want to rise with the sun but notice your coffee maker’s indicator light is on, indicating that it’s time to clean it, you’ll know what approach to take.