How To Clean Italian Coffee Maker

Disclaimer: There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.

People believe that Italian coffee makers and Mokas involve simpler technology than other coffee makers, they are less likely to need to clean and maintain them. There is nothing more false than this! So, how does one go about cleaning an Italian coffee maker?

Is Your Italian Coffee Maker Made Of Stainless Steel Or Aluminum

The most important question to answer: what is the material of your Italian coffee maker? If steel is the answer, you may simply clean it using a variety of cleaning agents. When cleaning aluminum, we must be more cautious since any sort of acid might harm the surface of the utensil. We must clean it after every use, regardless of the type. Of course, when it has cooled off.

How To Clean a Stainless Steel Italian Coffee Maker

Step 1:

Avoid washing your stainless steel Italian coffee maker with bleach or abrasive chemicals, as these may cause the steel to corrode.

Step 2:

Ideally, an Italian coffee maker should be thoroughly rinsed before the first time you use it. To eliminate any harmful residues or pollutants, wash it with soap and water, rinse it as necessary, and then start it up a few times with only water. In this manner, you can be certain that your coffee will not get any unusual scents or flavors.

Step 3:

Internal components such as the tube, filter, deposits, and funnel for the coffee should be cleaned regularly and with plenty of water. The coffee maker won’t function correctly if they are blocked, since no matter how high the pressure is, the water vapor will not rise.

Step 4:

After washing, thoroughly dry the coffee maker with a cloth. You should not let it air dry. Try to use blotting paper or kitchen paper to prevent moisture from staying in the coffee maker’s inside, which might lead to mold over time.

Step 5:

Separate the upper and lower body pieces and store them separately. The rubber seal that provides an airtight seal for the part was disassembled and unscrewed to prolong its life.

How To Clean An Aluminum Italian Coffee Maker

The ideal method is to use a sponge dampened with water and a few drops of dishwashing solutions. You can also use a solution of water and baking soda. If you use an acid product, whether it’s a cleaning product, a descaler, or citric acid, it can be a chemical reaction on the aluminum’s surface. As a result, the material is harmed. After each cleaning, dry your coffee maker with a cloth. As the water dries off, stains are left behind.

Italian coffee makers made out of aluminium contain an invisible layer of oil or grease that serves as protection. With time and use, this layer fades away. The cleaning of Italian coffee maker will serve in properly recovering and restoring the shine of this protective coating.

The following steps will explain how to clean an Italian coffee maker:

Step 1:

It is important to thoroughly clean the aluminum Italian coffee maker. Hot water and neutral soap are the best ways to do this.

Step 2:

Use a non-abrasive regular sponge to clean all traces of dirt. Repeat the process until you are sure that no dirt is left on the surface of the coffee maker.

Step 3:

Rinse and dry the coffee maker again thoroughly. You must dry it with a clean soft cloth, or with kitchen paper.

Step 4:

Start the healing process by heating the oven to 180ºC and dipping a cotton ball in oil. You can also use kitchen paper if you don’t want to use cotton. If there are any particles in the coffee maker, remove them.

Step 5:

Spread the oil evenly on the whole surface of the coffee maker. Rubbing a little isn’t enough. You need to apply the oil hard and make sure that it penetrates the entire surface of the coffee maker.

Step 6:

Place the coffee maker in the oven for 10 minutes. If necessary, first remove plastic parts and other parts that cannot be exposed to these temperatures.

Step 7:

Take it out and let it cool. As soon as it has cooled, you should clean the coffee maker as you normally would. Use a scouring pad or sponge that doesn’t scratch when cleaning. By the time it has thoroughly dried, a protective coating of grease will be formed. Now your coffee maker is fixed.

Conclusion

An Italian coffee maker is an elegant piece of equipment that delivers the best taste and is reliable for years. Taking care of your coffee maker will ensure that it lasts longer and will prevent bacteria from growing. Make sure your coffee maker gets the care it deserves, it will last a lifetime!

Leave a Reply

error: Content is DMCA Protected !