The Bunn Coffee Maker is renowned for its dependability and exceptional functionality. The manufacturer offers a variety of coffee maker models. Interestingly, some of the Bunn models are designed to function effectively in both residential and commercial environments. There might be instances where you need to drain the coffee maker for cleaning purposes or to resolve an issue. In the following section, we’ll cover the steps to remove water from a Bunn Coffee Maker.
Due to the unique design of the Bunn Coffee Maker, it can be a bit hard to drain out the water. There are two water reservoirs in the coffee maker. As they are inside the machine, you will find it tricky to get the water out. However, don’t worry; you will find some easy ways to remove the water from the Bunn Coffee Maker. Keep reading.
Why You Might Need Draining a Bunn Coffee Maker?
While using the coffee maker, you might require draining the water in its reservoir for several reasons. Such as, you need to empty the machine to transport it. You might not want to move a coffee maker with a filled water tank. The water inside the machine can leak and even malfunction the machine if you try to transfer it filled with water.
Furthermore, you might require draining the coffee maker while cleaning it. When you want to give a deep clean to your coffee maker by taking every part apart, you have to remove the water. Sometimes, you might also require doing it for troubleshooting the machine. The same thing might need to be done while you are taking apart the machine for fixing an issue or replacing a part.
How to Get Water Out of Bunn Coffee Maker
To take water out of the Bunn Coffee Maker, you will require following some simple steps. Although the steps are easy, they are equally important. A wrong move can malfunction the machine. So, follow the below steps and perform them in their respective order.
Step 1: Turn Off and Unplug the Machine
The first thing you need to do is turn off the coffee maker. Make sure that you have switched it properly. After that, disconnect the coffee maker’s plug from the electric outlet. The machine mustn’t be connected to the electricity when you are draining it. That is because it exposes the risk of getting shocks. The machine can also get malfunctioned by the electricity.
Step 2: Cool Down the Machine
The next thing you need to do is to cool down the machine. If you have used the machine within the last few hours, it will still get hot water inside it. You might leave the machine for a while to let it cool down automatically. If you don’t stay waiting, you can simply fill the machine with water cold water. This will make the water inside the machine cool. So, simply open the lid of the machine and pour the cold water.
Step 3: Remove the Hot Water
In this step, we will bring out the hot water from the machine. Once you have poured the cold water through the lid, position the craft or carafe in its place under the machine. Now close the lid of the machine by inserting the lid accurately. Once you closed the lid, the cold water will start pushing the hot water inside the machine. As a result, the hot water will come out in the carafe.
Note that you might require repeating the process several times. That is because all the hot water might not come out at once. When you see the machine is releasing cold water, you can then move to the next step.
Step 4: Draining the Cold Water
After getting rid of the hot water, you can now also remove the cold water from the above reservoir of the machine. To do this, begin with removing the brew funnel from the machine. After that, remove the spray head. You will require tweaking it in the anti-clockwise direction to loosen it and bring it out.
Now lift your coffee maker and take it to the sink or somewhere else for draining. Now you will require holding the machine in such an order that will flow water from both the top lid and spray head tube. You will require holding the device in this order until all the cold water is removed from it. Once the machine is completely drained, put it back on a flat surface.
Step 5: Put Back the Parts
You can now reassemble the parts of the coffee maker after draining out all the water from the top and bottom tanks. Begin with the spray head. Simply rotate it in the clockwise direction until it becomes tight. After that, put back the brew funnel in its compartment. If the lid is removed, you can also position it back at its place. That’s it; your coffee maker is now properly drained.
Tips for Bunn Coffee Maker
The below tips can help you to get the best out of your Bunn Coffee Maker:
- Make sure that you are cleaning the exterior of the coffee maker. Simply use a lint-free clean cloth to remove the dust and other things from the surface. Once in a while, clean the surface by dumping a cloth in the baking soda.
- Along with the outside, keep the inside of the coffee maker. Make sure to descale the machine regularly. Use vinegar or any other natural cleaner and run a brew cycle to delime the coffee maker.
- While using freshly roasted and ground coffee, wait a while before adding the machine to release the CO2.
- Use good filtered water instead of hard tap water. The hard water will accumulate the deposits inside the machine in quick order.
- Use the coffee filters from the Bunn Coffee Maker brand for the best performance. Rinse the filter on the water before adding coffee.
Conclusion
Following the above guideline, you should be able to drain the Bunn Coffee Maker easily. Make sure to implement the exact same steps to do this successfully. Also, make use of the above tips to get the best performance from your Bunn Coffee Maker.
