Table of Contents
Those who enjoy coffee will be pleased with a Krups coffee maker. It serves the freshest coffee in the world. The process of programming a Krups coffee maker is not as complicated as you might imagine. In the following sections, you will discover how to program the Krups coffee maker.
How To Prepare For The First Use
The first time you use your Krups coffee maker, you need to clean it by running a water cycle without using coffee or a ‘Duo Filter’.
Take out the ‘Duo Filter’ from its plastic covering, and rinse it under running water for 60 seconds.
Next, remove the water filtration holder from the reservoir.
Turn the lower part of the holder so that you can insert the ‘Duo Filter’ into its housing.
Install the water filtration holder again. You can now use the Krups coffee maker.
The Features Of Programmable Timer Models
Auto On – This feature lets you set the daily brewing start time.
Audible Signal – A beep signal indicates when the coffee is done brewing. You can turn this on or off.
1 – 3 Cup Setting – This feature allows you to extract the full flavor of your grinds from smaller amounts.
How To Program Your Krups Coffee Maker
Connect your coffee maker to the power source. For a short time, the display will light up.
You can use the O/I button if you do not want to use the programmable mode.
As the display lights up, an alternate display will show the current time and ‘ON’.
To turn off the coffee maker, press the O/I button. There will be no light in the display.
How To Set And Adjust The Clock
The coffee maker must be ‘OFF’.
For 3 seconds, hold down the PROG button. Hours will be displayed. You can adjust the hours in steps by pressing the h/min button.
Click the PROG button. The minutes will be displayed. To adjust the minutes, press the h/min button.
You need to confirm the setting by clicking the PROG button.
How To Program Auto On
This feature of the coffee maker will let you start automatically at the set time each day.
Click the PROG button. The display will display ‘PROG’ for about 1 second.
Again press the PROG button. The hours will be displayed. You can adjust the hours in steps by pressing the h/min button.
Press the PROG button again. The minutes will be displayed. To adjust the minutes, press the h/min button.
Press the PROG button to confirm the setting. On the display, you’ll see the time and a clock icon.
You can cancel the programming by pressing the h/min button.
How To Program Auto Off
Some Krups models do not have a timer, so it must be turned off manually. It will not automatically turn off.
Press the PROG button followed by the h/min button. You will see the time setting on the display.
To set the auto-off time, press the h/min button.
To confirm the setting, press the PROG button.
How To Program an Audible Signal
This feature gives an audible signal when the coffee is done brewing.
The display will show a bell icon with the current time.
Press ‘PROG’ then ‘1 – 3 cups’ to turn off the audible signal. When the audible signal is on, the display will show ‘YES’.
Press the ‘1-3 cup’ button again to turn off the audible signal. The display will display ‘NO’ if the audible signal is off.
To confirm, press the PROG button.
How To Program 1 – 3 Cup Flavor Setting
Making small quantities of coffee with this feature allows you to extract the full flavor.
Push the 1-3 cup button.
The display will show a cup icon with the current time. It cannot be changed once the brewing cycle has started.
Every person makes their perfect cup of coffee differently. There is art and science in it when it comes to both the coffee that is used and the equipment. A cup of coffee is made perfect by fine-tuning these aspects. Hopefully, by following these instructions you’ll be able to make a perfect cup of coffee for your specific tastes.